Improving Lives for a Better World, One Device at a Time

Thought and Commentary for the Medical Device Industry

show all

5 Additional Benefits Your UDI Could Be Providing

September 26, 2019 | Posted by Devin Carroll
You have been working hard to place Unique Device Identification (UDI) numbers on each of your devices. You now know more about bar codes, QR codes, scanner systems, and federal databases than you...

Design Controls (Part 6): Design Changes

September 19, 2019 | Posted by Ben Trombold
In a design-controlled project, no changes can be made to an approved design without the change being taken through the entire design process. Be aware of the following two factors when...

Design Controls (Part 5): Verification & Validation

September 12, 2019 | Posted by Ben Trombold
As with risk management, verification and validation are essential topics that must be investigated separately in order to make sure they are fully understood. Yet these are integral steps in the...

Design Controls (Part 4): Design Outputs & Review

September 5, 2019 | Posted by Ben Trombold
Design outputs are the result of each design phase and of the entire design effort. A completed and finished design will culminate in the device itself, its labeling and packaging, and the device...

Design Controls (Part 3): Understanding Design Inputs

August 29, 2019 | Posted by Ben Trombold
Design inputs usually fall into three categories:

Design Controls (Part 2): A Closer Look at Planning & Design Inputs

August 22, 2019 | Posted by Ben Trombold
Our second blog post in this series surrounding Design Controls will focus on the initial steps in the process, Planning and Design Inputs.

Get Started On Your Next Project